Will the Renogy 100W Lightweight Flexible Solar Panel work with the Goal Zero Yeti 6000X?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the Goal Zero Yeti 6000X: about 24.6 V on a 20°F morning against the station's 50 V limit, and about 100 W in full sun. Two panels: works (1 panel on High Power Port + 1 panel on 8mm), about 200 W.
Works
1 x 100W Lightweight Flexible Solar Panel into the Yeti 6000X (1 panel on High Power Port) stays inside 14 to 50 V and under 50 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Goal Zero gives solar charging as 600 W actual input at most, across its ports.
- Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
100 W, open-circuit 22.5 V, short-circuit 5.8 A, working 18.9 V / 5.3 A. Brand page Panel details
Goal Zero Yeti 6000XSolar input High Power Port: 14 to 50 V; 8mm: 14 to 50 V, 600 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on High Power Port + 1 panel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port + 8mm | 24.6 | 5.3 | 200 | Works |
| 2 panels in parallel on High Power Port The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port | 24.6 | 10.6 | 200 | Works |
| 2 panels in series on High Power Port The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | High Power Port | 49.3 | 5.3 | 200 | Works |
| 2 panels in parallel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | 8mm | 24.6 | 10.6 | 150 | Works |
| 2 panels in series on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | 8mm | 49.3 | 5.3 | 150 | Works |
Quick answers
Will the Renogy 100W Lightweight Flexible Solar Panel work with the Goal Zero Yeti 6000X?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the Goal Zero Yeti 6000X: about 24.6 V on a 20°F morning against the station's 50 V limit, and about 100 W in full sun. Two panels: works (1 panel on High Power Port + 1 panel on 8mm), about 200 W.
Can I connect two 100W Lightweight Flexible Solar Panel panels to the Yeti 6000X?
Yes, 1 panel on High Power Port + 1 panel on 8mm. That gives about 200 W.
What cable do I need to connect the 100W Lightweight Flexible Solar Panel to the Yeti 6000X?
Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Lightweight Flexible Solar Panel goes from 22.5 V on its label to about 24.6 V at 20°F and 25.4 V at 0°F. The Yeti 6000X accepts up to 50 V on the High Power Port.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Yeti 6000X
- Goal Zero Yeti 6000X: solar input 14 to 50 V on the Solar in 1 (High Power Port). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.5 V becomes 24.6 V.
- Current over the 50 A cap is safe: the station takes 50 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 600 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.