We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow NextGen 160W Portable Solar Panel work with the Goal Zero Yeti 500X?

Yes, with a catch. Fine in mild weather (21.3V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.3V, above the 22V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on 8mm), about 150 W.

Verdict

Works, with a catch

It charges, but read the note. Best option: 1 panel on 8mm.

1 x NextGen 160W Portable Solar Panel1 panel on 8mm
Yeti 500X8mm
Expected
150W
Voltage at 20F
23.3V
limit 22 V
Current
8.6A
cap 10 A
  • Fine in mild weather (21.3V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.3V, above the 22V limit. Cold makes panels push more voltage.
  • The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
  • Ships with an XT60i charging cable, so it plugs straight into recent EcoFlow stations.
Cables to buy
  • Needs an MC4 to 8mm adapter cable.
EcoFlow NextGen 160W Portable Solar Panel

160 W, open-circuit 21.3 V, short-circuit 9.1 A, working 18.6 V / 8.6 A. Brand page Panel details

Goal Zero Yeti 500X

Solar input 8mm: 13 to 22 V, 150 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on 8mm
Fine in mild weather (21.3V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.3V, above the 22V limit. Cold makes panels push more voltage.
8mm23.317.2150Works, with a catch
2 panels in series on 8mm
Open-circuit voltage 42.6V is above the station's 22V limit. Going over a station's input voltage limit can damage it.
8mm46.68.60Don't connect

Quick answers

Will the EcoFlow NextGen 160W Portable Solar Panel work with the Goal Zero Yeti 500X?

Yes, with a catch. Fine in mild weather (21.3V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.3V, above the 22V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on 8mm), about 150 W.

Can I connect two NextGen 160W Portable Solar Panel panels to the Yeti 500X?

Yes, 2 panels in parallel on 8mm. That gives about 150 W, with one catch: Fine in mild weather (21.3V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.3V, above the 22V limit. Cold makes panels push more voltage..

What cable do I need to connect the NextGen 160W Portable Solar Panel to the Yeti 500X?

Needs an MC4 to 8mm adapter cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One NextGen 160W Portable Solar Panel goes from 21.3 V on its label to about 23.3 V at 20°F and 24 V at 0°F. The Yeti 500X accepts up to 22 V on the 8mm.

Where to buy

$369 at the EcoFlow store, Oct 28, 2026
BuyAmazon
Out of stock at the Goal Zero store
View at store

We may earn a commission if you buy through these links. It never changes a verdict.

Rules we applied
  • Goal Zero Yeti 500X: solar input 13 to 22 V on the Solar in (8mm). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.3 V becomes 23.3 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 150 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026