Will the Jackery SolarSaga 200 (JS-200E) work with the Goal Zero Yeti 200X?
Yes, with a catch. Fine in mild weather (22V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.9V, above the 22V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on 8mm), about 100 W.
Works, with a catch
It charges, but read the note. Best option: 1 panel on 8mm.
- Fine in mild weather (22V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.9V, above the 22V limit. Cold makes panels push more voltage.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- The panels can push 11.5A but this input takes 7A, so the station caps it. Safe, you just lose some watts.
- Its AC outlet is modified sine wave, which some devices (and most CPAPs with humidifiers) do not like.
- Needs a DC8020 to 8mm adapter; check any third-party adapter is rated for the current.
200 W, open-circuit 22 V, short-circuit 12.5 A, working 18 V / 11.5 A. Manual Panel details
Goal Zero Yeti 200XSolar input 8mm: 13 to 22 V, 100 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on 8mm Fine in mild weather (22V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.9V, above the 22V limit. Cold makes panels push more voltage. | 8mm | 23.9 | 23 | 100 | Works, with a catch |
| 2 panels in series on 8mm Open-circuit voltage 44V is above the station's 22V limit. Going over a station's input voltage limit can damage it. | 8mm | 47.8 | 11.5 | 0 | Don't connect |
Quick answers
Will the Jackery SolarSaga 200 (JS-200E) work with the Goal Zero Yeti 200X?
Yes, with a catch. Fine in mild weather (22V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.9V, above the 22V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on 8mm), about 100 W.
Can I connect two SolarSaga 200 (JS-200E) panels to the Yeti 200X?
Yes, 2 panels in parallel on 8mm. That gives about 100 W, with one catch: Fine in mild weather (22V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 23.9V, above the 22V limit. Cold makes panels push more voltage..
What cable do I need to connect the SolarSaga 200 (JS-200E) to the Yeti 200X?
Needs a DC8020 to 8mm adapter; check any third-party adapter is rated for the current.
Is it safe on a cold morning?
Panel voltage rises in the cold. One SolarSaga 200 (JS-200E) goes from 22 V on its label to about 23.9 V at 20°F and 24.5 V at 0°F. The Yeti 200X accepts up to 22 V on the 8mm.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
- Goal Zero Yeti 200X: solar input 13 to 22 V on the Solar in (8mm). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.27% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 22 V becomes 23.9 V.
- Current over the 7 A cap is safe: the station takes 7 A and you get fewer watts. We count only the capped watts.
- Max 100 W on this input.
- Cold-morning voltage uses this panel's own coefficient from its manual, 0.27% per °C.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.