Will the Renogy 100W Lightweight Flexible Solar Panel work with the Goal Zero Yeti 1500?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the Goal Zero Yeti 1500: about 24.6 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (1 panel on HPP + 1 panel on 8mm), about 200 W.
Works
1 x 100W Lightweight Flexible Solar Panel into the Yeti 1500 (1 panel on HPP) stays inside 12.3 to 60 V and under 20 A, even at 20F.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
100 W, open-circuit 22.5 V, short-circuit 5.8 A, working 18.9 V / 5.3 A. Brand page Panel details
Goal Zero Yeti 1500Solar input HPP: 12.3 to 60 V; 8mm: 13.2 to 30 V, 900 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on HPP + 1 panel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | HPP + 8mm | 24.6 | 5.3 | 200 | Works |
| 2 panels in parallel on HPP The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | HPP | 24.6 | 10.6 | 200 | Works |
| 2 panels in series on HPP The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | HPP | 49.3 | 5.3 | 200 | Works |
| 2 panels in parallel on 8mm The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number. | 8mm | 24.6 | 10.6 | 189 | Works |
| 2 panels in series on 8mm Open-circuit voltage 45V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | 8mm | 49.3 | 5.3 | 0 | Don't connect |
Quick answers
Will the Renogy 100W Lightweight Flexible Solar Panel work with the Goal Zero Yeti 1500?
Yes. One Renogy 100W Lightweight Flexible Solar Panel works with the Goal Zero Yeti 1500: about 24.6 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (1 panel on HPP + 1 panel on 8mm), about 200 W.
Can I connect two 100W Lightweight Flexible Solar Panel panels to the Yeti 1500?
Yes, 1 panel on HPP + 1 panel on 8mm. That gives about 200 W.
What cable do I need to connect the 100W Lightweight Flexible Solar Panel to the Yeti 1500?
Needs an MC4 to HPP (Anderson Powerpole) adapter cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One 100W Lightweight Flexible Solar Panel goes from 22.5 V on its label to about 24.6 V at 20°F and 25.4 V at 0°F. The Yeti 1500 accepts up to 60 V on the HPP.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Yeti 1500
- Goal Zero Yeti 1500: solar input 12.3 to 60 V on the Solar in 1 (HPP). Goal Zero does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 22.5 V becomes 24.6 V.
- Current over the 20 A cap is safe: the station takes 20 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input, 900 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.