We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI PV200D work with the EcoFlow RIVER mini?

Yes. One BLUETTI PV200D works with the EcoFlow RIVER mini: about 26.9 V on a 20°F morning against the station's 39 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on DC input), about 100 W.

Verdict

Works

1 x PV200D into the RIVER mini (1 panel on DC input) stays inside 11 to 39 V, even at 20F. The station caps the current at 8 A.

1 x PV200D1 panel on DC input
RIVER miniDC input
Expected
100W
Voltage at 20F
26.9V
limit 39 V
Current
9.7A
cap 8 A
  • The panels can push 9.7A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Cables to buy
  • The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
BLUETTI PV200D

200 W, open-circuit 24.6 V, short-circuit 10.8 A, working 20.4 V / 9.7 A. Manual Panel details

EcoFlow RIVER mini

Solar input DC input: 11 to 39 V, 100 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on DC input
The panels can push 19.4A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
DC input26.919.4100Works
2 panels in series on DC input
Open-circuit voltage 49.2V is above the station's 39V limit. Going over a station's input voltage limit can damage it.
DC input53.99.70Don't connect

Quick answers

Will the BLUETTI PV200D work with the EcoFlow RIVER mini?

Yes. One BLUETTI PV200D works with the EcoFlow RIVER mini: about 26.9 V on a 20°F morning against the station's 39 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on DC input), about 100 W.

Can I connect two PV200D panels to the RIVER mini?

Yes, 2 panels in parallel on DC input. That gives about 100 W.

What cable do I need to connect the PV200D to the RIVER mini?

The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV200D goes from 24.6 V on its label to about 26.9 V at 20°F and 27.8 V at 0°F. The RIVER mini accepts up to 39 V on the DC input.

Where to buy

Price not checked yet
$399 at the EcoFlow store, Oct 28, 2026
Buy

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the RIVER mini

→Jackery SolarSaga 200 (JS-200E), about 100 W with two
→Jackery SolarSaga 200 (JS-200D), about 100 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 100 W with two
→BLUETTI PV350D, about 100 W with two
→Anker SOLIX PS100 Bifacial, about 100 W with two

All 33 panels checked against the RIVER mini

Rules we applied
  • EcoFlow RIVER mini: solar input 11 to 39 V on the Solar in (DC input). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 24.6 V becomes 26.9 V.
  • Current over the 8 A cap is safe: the station takes 8 A and you get fewer watts. We count only the capped watts.
  • Max 100 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the manualPV200D label values
Checked Oct 28, 2026