We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Jackery SolarSaga 200 (JS-200D) work with the EcoFlow RIVER 2?

Yes. One Jackery SolarSaga 200 (JS-200D) works with the EcoFlow RIVER 2: about 26.9 V on a 20°F morning against the station's 30 V limit, and about 110 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 110 W.

Verdict

Works

1 x SolarSaga 200 (JS-200D) into the RIVER 2 (1 panel on Solar input) stays inside 11 to 30 V, even at 20F. The station caps the current at 8 A.

1 x SolarSaga 200 (JS-200D)1 panel on Solar input
RIVER 2Solar input
Expected
110W
Voltage at 20F
26.9V
limit 30 V
Current
10A
cap 8 A
  • The panels can push 10A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Cables to buy
  • Check the station's manual for the right solar cable.
Jackery SolarSaga 200 (JS-200D)

200 W, open-circuit 24.8 V, short-circuit 11.2 A, working 20 V / 10 A. Manual Panel details

EcoFlow RIVER 2

Solar input Solar input: 11 to 30 V, 110 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
The panels can push 20A but this input takes 8A, so the station caps it. Safe, you just lose some watts.
Solar input26.920110Works
2 panels in series on Solar input
Open-circuit voltage 49.6V is above the station's 30V limit. Going over a station's input voltage limit can damage it.
Solar input53.8100Don't connect

Quick answers

Will the Jackery SolarSaga 200 (JS-200D) work with the EcoFlow RIVER 2?

Yes. One Jackery SolarSaga 200 (JS-200D) works with the EcoFlow RIVER 2: about 26.9 V on a 20°F morning against the station's 30 V limit, and about 110 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 110 W.

Can I connect two SolarSaga 200 (JS-200D) panels to the RIVER 2?

Yes, 2 panels in parallel on Solar input. That gives about 110 W.

What cable do I need to connect the SolarSaga 200 (JS-200D) to the RIVER 2?

Check the station's manual for the right solar cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One SolarSaga 200 (JS-200D) goes from 24.8 V on its label to about 26.9 V at 20°F and 27.6 V at 0°F. The RIVER 2 accepts up to 30 V on the Solar input.

Where to buy

Price not checked yet
$219 at the EcoFlow store, Oct 28, 2026
Buy

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the RIVER 2

→Jackery SolarSaga 200 (JS-200E), about 110 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 110 W with two
→BLUETTI PV200D, about 110 W with two
→Anker SOLIX PS100 Bifacial, about 110 W with two
→EcoFlow 100W Rigid Solar Panel, about 110 W with two

All 33 panels checked against the RIVER 2

Rules we applied
  • EcoFlow RIVER 2: solar input 11 to 30 V on the Solar in (Solar input). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.27% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 24.8 V becomes 26.9 V.
  • Current over the 8 A cap is safe: the station takes 8 A and you get fewer watts. We count only the capped watts.
  • Max 110 W on this input.
Assumptions
  • Cold-morning voltage uses this panel's own coefficient from its manual, 0.27% per °C.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pageRIVER 2 spec page, solar input
Checked Oct 28, 2026