We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI PV100 FX Flexible Solar Panel work with the EcoFlow RIVER 2 Max 500?

Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the EcoFlow RIVER 2 Max 500: about 45.3 V on a 20°F morning against the station's 50 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Verdict

Works

1 x PV100 FX Flexible Solar Panel into the RIVER 2 Max 500 (1 panel on Solar input) stays inside 11 to 50 V and under 13 A, even at 20F.

1 x PV100 FX Flexible Solar Panel1 panel on Solar input
RIVER 2 Max 500Solar input
Expected
100W
Voltage at 20F
45.3V
limit 50 V
Current
3.1A
cap 13 A
  • 41.4 V open circuit is high for a 100 W panel: two in series reach 82.8 V, more than most stations take.
  • The BLUETTI US store sells it only in sets of 2 or more.
Cables to buy
  • Use the solar charging cable that came with the station (MC4 on the panel side).
BLUETTI PV100 FX Flexible Solar Panel

100 W, open-circuit 41.4 V, short-circuit 3.1 A. Brand page Panel details

EcoFlow RIVER 2 Max 500

Solar input Solar input: 11 to 50 V, 220 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input45.36.1200Works
2 panels in series on Solar input
Open-circuit voltage 82.8V is above the station's 50V limit. Going over a station's input voltage limit can damage it.
Solar input90.73.10Don't connect

Quick answers

Will the BLUETTI PV100 FX Flexible Solar Panel work with the EcoFlow RIVER 2 Max 500?

Yes. One BLUETTI PV100 FX Flexible Solar Panel works with the EcoFlow RIVER 2 Max 500: about 45.3 V on a 20°F morning against the station's 50 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.

Can I connect two PV100 FX Flexible Solar Panel panels to the RIVER 2 Max 500?

Yes, 2 panels in parallel on Solar input. That gives about 200 W.

What cable do I need to connect the PV100 FX Flexible Solar Panel to the RIVER 2 Max 500?

Use the solar charging cable that came with the station (MC4 on the panel side).

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV100 FX Flexible Solar Panel goes from 41.4 V on its label to about 45.3 V at 20°F and 46.7 V at 0°F. The RIVER 2 Max 500 accepts up to 50 V on the Solar input.

Where to buy

$329 at the EcoFlow store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the RIVER 2 Max 500

→Jackery SolarSaga 200 (JS-200E), about 220 W with two
→Jackery SolarSaga 200 (JS-200D), about 220 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 220 W with two
→BLUETTI PV200D, about 220 W with two
→BLUETTI PV350D, about 220 W with two

All 33 panels checked against the RIVER 2 Max 500

Rules we applied
  • EcoFlow RIVER 2 Max 500: solar input 11 to 50 V on the Solar in (Solar input). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 41.4 V becomes 45.3 V.
  • Current over the 13 A cap is safe: the station takes 13 A and you get fewer watts. We count only the capped watts.
  • Max 220 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026