We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Jackery SolarSaga 200 (JS-200D) work with the EcoFlow DELTA 3 Ultra?

Yes. One Jackery SolarSaga 200 (JS-200D) works with the EcoFlow DELTA 3 Ultra: about 26.9 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in series on Solar input (XT60i)), about 400 W.

Verdict

Works

1 x SolarSaga 200 (JS-200D) into the DELTA 3 Ultra (1 panel on Solar input (XT60i)) stays inside 11 to 60 V and under 18 A, even at 20F.

1 x SolarSaga 200 (JS-200D)1 panel on Solar input (XT60i)
DELTA 3 UltraSolar input (XT60i)
Expected
200W
Voltage at 20F
26.9V
limit 60 V
Current
10A
cap 18 A
Cables to buy
  • Needs a DC8020 to XT60 adapter. Neither brand sells this pairing, so check any third-party adapter is rated for the current.
Jackery SolarSaga 200 (JS-200D)

200 W, open-circuit 24.8 V, short-circuit 11.2 A, working 20 V / 10 A. Manual Panel details

EcoFlow DELTA 3 Ultra

Solar input Solar input (XT60i): 11 to 60 V, 800 W max. Manual Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in series on Solar input (XT60i)
Best option
Solar input (XT60i)53.810400Works
2 panels in parallel on Solar input (XT60i)
The panels can push 20A but this input takes 18A, so the station caps it. Safe, you just lose some watts.
Solar input (XT60i)26.920360Works

Quick answers

Will the Jackery SolarSaga 200 (JS-200D) work with the EcoFlow DELTA 3 Ultra?

Yes. One Jackery SolarSaga 200 (JS-200D) works with the EcoFlow DELTA 3 Ultra: about 26.9 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in series on Solar input (XT60i)), about 400 W.

Can I connect two SolarSaga 200 (JS-200D) panels to the DELTA 3 Ultra?

Yes, 2 panels in series on Solar input (XT60i). That gives about 400 W.

What cable do I need to connect the SolarSaga 200 (JS-200D) to the DELTA 3 Ultra?

Needs a DC8020 to XT60 adapter. Neither brand sells this pairing, so check any third-party adapter is rated for the current.

Is it safe on a cold morning?

Panel voltage rises in the cold. One SolarSaga 200 (JS-200D) goes from 24.8 V on its label to about 26.9 V at 20°F and 27.6 V at 0°F. The DELTA 3 Ultra accepts up to 60 V on the Solar input (XT60i).

Where to buy

Price not checked yet
$1,349 at the EcoFlow store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the DELTA 3 Ultra

→EcoFlow 400W Portable Solar Panel, about 738 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→BLUETTI PV350D, about 497 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two

All 33 panels checked against the DELTA 3 Ultra

Rules we applied
  • EcoFlow DELTA 3 Ultra: solar input 11 to 60 V on the Solar in (Solar input (XT60i)). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.27% per °C below 77F (25°C), this panel's own figure. At 20F one panel's 24.8 V becomes 26.9 V.
  • Current over the 18 A cap is safe: the station takes 18 A and you get fewer watts. We count only the capped watts.
  • Max 800 W on this input.
Assumptions
  • Cold-morning voltage uses this panel's own coefficient from its manual, 0.27% per °C.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026