We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI PV200D work with the EcoFlow DELTA 2 Max?

Yes. One BLUETTI PV200D works with the EcoFlow DELTA 2 Max: about 26.9 V on a 20°F morning against the station's 60 V limit, and about 198 W in full sun. Two panels: works (1 panel on Solar input + 1 panel on Solar input), about 396 W.

Verdict

Works

1 x PV200D into the DELTA 2 Max (1 panel on Solar input) stays inside 11 to 60 V and under 15 A, even at 20F.

1 x PV200D1 panel on Solar input
DELTA 2 MaxSolar input
Expected
198W
Voltage at 20F
26.9V
limit 60 V
Current
9.7A
cap 15 A
Cables to buy
  • The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
BLUETTI PV200D

200 W, open-circuit 24.6 V, short-circuit 10.8 A, working 20.4 V / 9.7 A. Manual Panel details

EcoFlow DELTA 2 Max

Solar input Solar input: 11 to 60 V; Solar input: 11 to 60 V, 1000 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
1 panel on Solar input + 1 panel on Solar input
Best option
Solar input + Solar input26.99.7396Works
2 panels in series on Solar input
Solar input53.99.7396Works
2 panels in parallel on Solar input
The panels can push 19.4A but this input takes 15A, so the station caps it. Safe, you just lose some watts.
Solar input26.919.4306Works

Quick answers

Will the BLUETTI PV200D work with the EcoFlow DELTA 2 Max?

Yes. One BLUETTI PV200D works with the EcoFlow DELTA 2 Max: about 26.9 V on a 20°F morning against the station's 60 V limit, and about 198 W in full sun. Two panels: works (1 panel on Solar input + 1 panel on Solar input), about 396 W.

Can I connect two PV200D panels to the DELTA 2 Max?

Yes, 1 panel on Solar input + 1 panel on Solar input. That gives about 396 W.

What cable do I need to connect the PV200D to the DELTA 2 Max?

The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV200D goes from 24.6 V on its label to about 26.9 V at 20°F and 27.8 V at 0°F. The DELTA 2 Max accepts up to 60 V on the Solar input.

Where to buy

Price not checked yet
$1,049 at the EcoFlow store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the DELTA 2 Max

→EcoFlow 400W Portable Solar Panel, about 800 W with two
→BLUETTI PV350D, about 700 W with two
→Renogy 250W N-Type Bifacial Solar Panel, about 500 W with two
→EcoFlow NextGen 220W Bifacial Portable Solar Panel, about 438 W with two
→Jackery SolarSaga 200 (JS-200E), about 400 W with two

All 33 panels checked against the DELTA 2 Max

Rules we applied
  • EcoFlow DELTA 2 Max: solar input 11 to 60 V on the Solar in 1 (Solar input). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 24.6 V becomes 26.9 V.
  • Current over the 15 A cap is safe: the station takes 15 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input, 1,000 W across all inputs.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the manualPV200D label values
Checked Oct 28, 2026