We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the Anker SOLIX PS200 Bifacial work with the EcoFlow DELTA 1300 (1260Wh)?

Yes. One Anker SOLIX PS200 Bifacial works with the EcoFlow DELTA 1300 (1260Wh): about 63.1 V on a 20°F morning against the station's 65 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 399 W.

Verdict

Works

1 x PS200 Bifacial into the DELTA 1300 (1260Wh) (1 panel on Solar input) stays inside 10 to 65 V and under 10 A, even at 20F.

1 x PS200 Bifacial1 panel on Solar input
DELTA 1300 (1260Wh)Solar input
Expected
200W
Voltage at 20F
63.1V
limit 65 V
Current
4.2A
cap 10 A
Cables to buy
  • The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
Anker SOLIX PS200 Bifacial

200 W, open-circuit 57.6 V, short-circuit 4.4 A, working 48 V / 4.2 A. Unconfirmed Panel details

EcoFlow DELTA 1300 (1260Wh)

Solar input Solar input: 10 to 65 V, 400 W max. Brand page Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in parallel on Solar input
Best option
Solar input63.18.3399Works
2 panels in series on Solar input
Open-circuit voltage 115.2V is above the station's 65V limit. Going over a station's input voltage limit can damage it.
Solar input126.14.20Don't connect

Quick answers

Will the Anker SOLIX PS200 Bifacial work with the EcoFlow DELTA 1300 (1260Wh)?

Yes. One Anker SOLIX PS200 Bifacial works with the EcoFlow DELTA 1300 (1260Wh): about 63.1 V on a 20°F morning against the station's 65 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 399 W.

Can I connect two PS200 Bifacial panels to the DELTA 1300 (1260Wh)?

Yes, 2 panels in parallel on Solar input. That gives about 399 W.

What cable do I need to connect the PS200 Bifacial to the DELTA 1300 (1260Wh)?

The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PS200 Bifacial goes from 57.6 V on its label to about 63.1 V at 20°F and 65 V at 0°F. The DELTA 1300 (1260Wh) accepts up to 65 V on the Solar input.

Where to buy

$500 at the Anker SOLIX store, Oct 28, 2026
BuyAmazon
Out of stock at the EcoFlow store
View at store

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the DELTA 1300 (1260Wh)

→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→EcoFlow 400W Portable Solar Panel, about 400 W with two
→BLUETTI SP200L Solar Panel, about 400 W with two
→Anker SOLIX PS400 Bifacial, about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two

All 33 panels checked against the DELTA 1300 (1260Wh)

Rules we applied
  • EcoFlow DELTA 1300 (1260Wh): solar input 10 to 65 V on the Solar in (Solar input). EcoFlow sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 57.6 V becomes 63.1 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 400 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
  • Some numbers for Anker SOLIX PS200 Bifacial come from a shop listing we have not confirmed in the manual yet.
Sources
Shop listing, not yet confirmedPS200 Bifacial label values
Checked Oct 28, 2026