Will the BLUETTI PV120 Solar Panel work with the DJI Power 2000?
Yes. One BLUETTI PV120 Solar Panel works with the DJI Power 2000: about 26.7 V on a 20°F morning against the station's 30 V limit, and about 120 W in full sun. Two panels: works (1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2), about 240 W.
Works
1 x PV120 Solar Panel into the Power 2000 (1 panel on XT60, Solar Panel Adapter Module channel 1) stays inside 12 to 30 V and under 10 A, even at 20F.
- Solar needs the DJI Power Solar Panel Adapter Module (MPPT), sold separately: three XT60 inputs, each 12 to 30 V, up to 10 A and 200 W. DJI says each panel must stay under 30 V open-circuit, so most 100 W and 200 W 12 V panels fit one per input, never two in series.
- DJI also sells a 1.8kW Solar/Car Super Fast Charger for the Power 2000 (up to 1800 W of solar); its input limits are not on DJI's US pages, so the checker uses the adapter module.
- Use an MC4 to XT60 solar cable.
120 W, open-circuit 24.4 V, short-circuit 6.4 A, working 19.6 V / 6.1 A. Brand page Panel details
DJI Power 2000Solar input XT60, Solar Panel Adapter Module channel 1: 12 to 30 V; XT60, Solar Panel Adapter Module channel 2: 12 to 30 V; XT60, Solar Panel Adapter Module channel 3: 12 to 30 V, 400 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2 Best option | XT60, Solar Panel Adapter Module channel 1 + XT60, Solar Panel Adapter Module channel 2 | 26.7 | 6.1 | 240 | Works |
| 2 panels in parallel on XT60, Solar Panel Adapter Module channel 1 The panels can push 12.2A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | XT60, Solar Panel Adapter Module channel 1 | 26.7 | 12.2 | 196 | Works |
| 2 panels in parallel on XT60, Solar Panel Adapter Module channel 2 The panels can push 12.2A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | XT60, Solar Panel Adapter Module channel 2 | 26.7 | 12.2 | 196 | Works |
| 2 panels in parallel on XT60, Solar Panel Adapter Module channel 3 The panels can push 12.2A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | XT60, Solar Panel Adapter Module channel 3 | 26.7 | 12.2 | 196 | Works |
| 2 panels in series on XT60, Solar Panel Adapter Module channel 1 Open-circuit voltage 48.8V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60, Solar Panel Adapter Module channel 1 | 53.4 | 6.1 | 0 | Don't connect |
| 2 panels in series on XT60, Solar Panel Adapter Module channel 2 Open-circuit voltage 48.8V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60, Solar Panel Adapter Module channel 2 | 53.4 | 6.1 | 0 | Don't connect |
| 2 panels in series on XT60, Solar Panel Adapter Module channel 3 Open-circuit voltage 48.8V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60, Solar Panel Adapter Module channel 3 | 53.4 | 6.1 | 0 | Don't connect |
Quick answers
Will the BLUETTI PV120 Solar Panel work with the DJI Power 2000?
Yes. One BLUETTI PV120 Solar Panel works with the DJI Power 2000: about 26.7 V on a 20°F morning against the station's 30 V limit, and about 120 W in full sun. Two panels: works (1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2), about 240 W.
Can I connect two PV120 Solar Panel panels to the Power 2000?
Yes, 1 panel on XT60, Solar Panel Adapter Module channel 1 + 1 panel on XT60, Solar Panel Adapter Module channel 2. That gives about 240 W.
What cable do I need to connect the PV120 Solar Panel to the Power 2000?
Use an MC4 to XT60 solar cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One PV120 Solar Panel goes from 24.4 V on its label to about 26.7 V at 20°F and 27.5 V at 0°F. The Power 2000 accepts up to 30 V on the XT60, Solar Panel Adapter Module channel 1.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Power 2000
- DJI Power 2000: solar input 12 to 30 V on the Solar in 1 (XT60, Solar Panel Adapter Module channel 1). DJI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 24.4 V becomes 26.7 V.
- Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
- Max 200 W on this input, 400 W across all inputs.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.