Will the BLUETTI PV100 FX Flexible Solar Panel work with the BLUETTI PS72?
No. Open-circuit voltage 41.4V is above the station's 28V limit. Going over a station's input voltage limit can damage it. Two panels: don't connect (2 panels in parallel on Solar input), about 0 W.
Don't connect
Do not plug this in. Open-circuit voltage 41.4V is above the station's 28V limit. Going over a station's input voltage limit can damage it.
- Open-circuit voltage 41.4V is above the station's 28V limit. Going over a station's input voltage limit can damage it.
- The manual or page does not give a current limit for this input, so current was not checked.
- 41.4 V open circuit is high for a 100 W panel: two in series reach 82.8 V, more than most stations take.
- The BLUETTI US store sells it only in sets of 2 or more.
100 W, open-circuit 41.4 V, short-circuit 3.1 A. Brand page Panel details
BLUETTI PS72Solar input Solar input: 12 to 28 V, 200 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on Solar input Open-circuit voltage 41.4V is above the station's 28V limit. Going over a station's input voltage limit can damage it. | Solar input | 45.3 | 6.1 | 0 | Don't connect |
| 2 panels in series on Solar input Open-circuit voltage 82.8V is above the station's 28V limit. Going over a station's input voltage limit can damage it. | Solar input | 90.7 | 3.1 | 0 | Don't connect |
Quick answers
Will the BLUETTI PV100 FX Flexible Solar Panel work with the BLUETTI PS72?
No. Open-circuit voltage 41.4V is above the station's 28V limit. Going over a station's input voltage limit can damage it. Two panels: don't connect (2 panels in parallel on Solar input), about 0 W.
Can I connect two PV100 FX Flexible Solar Panel panels to the PS72?
No: Open-circuit voltage 41.4V is above the station's 28V limit. Going over a station's input voltage limit can damage it.
Is it safe on a cold morning?
Panel voltage rises in the cold. One PV100 FX Flexible Solar Panel goes from 41.4 V on its label to about 45.3 V at 20°F and 46.7 V at 0°F. The PS72 accepts up to 28 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the PS72
- BLUETTI PS72: solar input 12 to 28 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 41.4 V becomes 45.3 V.
- The current limit for this input is not confirmed yet.
- Max 200 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.