Will the Rich Solar MEGA 100 SLIM work with the BLUETTI Elite 100 V2?
Yes. One Rich Solar MEGA 100 SLIM works with the BLUETTI Elite 100 V2: about 25.8 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.
Works
1 x MEGA 100 SLIM into the Elite 100 V2 (1 panel on Solar input) stays inside 12 to 60 V and under 20 A, even at 20F.
- Use the solar charging cable that came with the station (MC4 on the panel side).
100 W, open-circuit 23.6 V, short-circuit 5.4 A, working 19.6 V / 5.1 A. Brand page Panel details
BLUETTI Elite 100 V2Solar input Solar input: 12 to 60 V, 1000 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on Solar input Best option | Solar input | 25.8 | 10.2 | 200 | Works |
| 2 panels in series on Solar input | Solar input | 51.7 | 5.1 | 200 | Works |
Quick answers
Will the Rich Solar MEGA 100 SLIM work with the BLUETTI Elite 100 V2?
Yes. One Rich Solar MEGA 100 SLIM works with the BLUETTI Elite 100 V2: about 25.8 V on a 20°F morning against the station's 60 V limit, and about 100 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 200 W.
Can I connect two MEGA 100 SLIM panels to the Elite 100 V2?
Yes, 2 panels in parallel on Solar input. That gives about 200 W.
What cable do I need to connect the MEGA 100 SLIM to the Elite 100 V2?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 100 SLIM goes from 23.6 V on its label to about 25.8 V at 20°F and 26.6 V at 0°F. The Elite 100 V2 accepts up to 60 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Elite 100 V2
- BLUETTI Elite 100 V2: solar input 12 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 23.6 V becomes 25.8 V.
- Current over the 20 A cap is safe: the station takes 20 A and you get fewer watts. We count only the capped watts.
- Max 1,000 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.