Will the Rich Solar MEGA 200 PRO (24V) work with the BLUETTI Elite 100 mini?
Yes. One Rich Solar MEGA 200 PRO (24V) works with the BLUETTI Elite 100 mini: about 47.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on DC input), about 350 W.
Works
1 x MEGA 200 PRO (24V) into the Elite 100 mini (1 panel on DC input) stays inside 12 to 60 V and under 10 A, even at 20F.
- A 24 V panel: 43.5 V open circuit on its own, so two in series (87 V) only suit high-voltage solar inputs.
- Use the solar charging cable that came with the station (MC4 on the panel side).
200 W, open-circuit 43.5 V, short-circuit 5.9 A, working 36.3 V / 5.5 A. Brand page Panel details
BLUETTI Elite 100 miniSolar input DC input: 12 to 60 V, 350 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on DC input The panels can push 11A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | DC input | 47.6 | 11 | 350 | Works |
| 2 panels in series on DC input Open-circuit voltage 87V is above the station's 60V limit. Going over a station's input voltage limit can damage it. | DC input | 95.3 | 5.5 | 0 | Don't connect |
Quick answers
Will the Rich Solar MEGA 200 PRO (24V) work with the BLUETTI Elite 100 mini?
Yes. One Rich Solar MEGA 200 PRO (24V) works with the BLUETTI Elite 100 mini: about 47.6 V on a 20°F morning against the station's 60 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on DC input), about 350 W.
Can I connect two MEGA 200 PRO (24V) panels to the Elite 100 mini?
Yes, 2 panels in parallel on DC input. That gives about 350 W.
What cable do I need to connect the MEGA 200 PRO (24V) to the Elite 100 mini?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One MEGA 200 PRO (24V) goes from 43.5 V on its label to about 47.6 V at 20°F and 49.1 V at 0°F. The Elite 100 mini accepts up to 60 V on the DC input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the Elite 100 mini
- BLUETTI Elite 100 mini: solar input 12 to 60 V on the Solar in (DC input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 43.5 V becomes 47.6 V.
- Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
- Max 350 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.