Will the Anker SOLIX PS200 Bifacial work with the BLUETTI AC200P L?
Yes. One Anker SOLIX PS200 Bifacial works with the BLUETTI AC200P L: about 63.1 V on a 20°F morning against the station's 145 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 399 W.
Works
1 x PS200 Bifacial into the AC200P L (1 panel on Solar input) stays inside 12 to 145 V and under 15 A, even at 20F.
- The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
200 W, open-circuit 57.6 V, short-circuit 4.4 A, working 48 V / 4.2 A. Unconfirmed Panel details
BLUETTI AC200P LSolar input Solar input: 12 to 145 V, 1200 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on Solar input Best option | Solar input | 63.1 | 8.3 | 399 | Works |
| 2 panels in series on Solar input | Solar input | 126.1 | 4.2 | 399 | Works |
Quick answers
Will the Anker SOLIX PS200 Bifacial work with the BLUETTI AC200P L?
Yes. One Anker SOLIX PS200 Bifacial works with the BLUETTI AC200P L: about 63.1 V on a 20°F morning against the station's 145 V limit, and about 200 W in full sun. Two panels: works (2 panels in parallel on Solar input), about 399 W.
Can I connect two PS200 Bifacial panels to the AC200P L?
Yes, 2 panels in parallel on Solar input. That gives about 399 W.
What cable do I need to connect the PS200 Bifacial to the AC200P L?
The panel's plug type is not confirmed yet. Check the label or the box before buying a cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One PS200 Bifacial goes from 57.6 V on its label to about 63.1 V at 20°F and 65 V at 0°F. The AC200P L accepts up to 145 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the AC200P L
- BLUETTI AC200P L: solar input 12 to 145 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 57.6 V becomes 63.1 V.
- Current over the 15 A cap is safe: the station takes 15 A and you get fewer watts. We count only the capped watts.
- Max 1,200 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
- Some numbers for Anker SOLIX PS200 Bifacial come from a shop listing we have not confirmed in the manual yet.