Will the Renogy 200W N-Type Solar Panel work with the BLUETTI AC180P?
Yes. One Renogy 200W N-Type Solar Panel works with the BLUETTI AC180P: about 25.2 V on a 20°F morning against the station's 60 V limit, and about 192 W in full sun. Two panels: works (2 panels in series on Solar input), about 384 W.
Works
1 x 200W N-Type Solar Panel into the AC180P (1 panel on Solar input) stays inside 12 to 60 V, even at 20F. The station caps the current at 10 A.
- The panels can push 10.4A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
- Use the solar charging cable that came with the station (MC4 on the panel side).
200 W, open-circuit 23 V, short-circuit 11.1 A, working 19.2 V / 10.4 A. Brand page Panel details
BLUETTI AC180PSolar input Solar input: 12 to 60 V, 500 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in series on Solar input The panels can push 10.4A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | Solar input | 50.4 | 10.4 | 384 | Works |
| 2 panels in parallel on Solar input The panels can push 20.8A but this input takes 10A, so the station caps it. Safe, you just lose some watts. | Solar input | 25.2 | 20.8 | 192 | Works |
Quick answers
Will the Renogy 200W N-Type Solar Panel work with the BLUETTI AC180P?
Yes. One Renogy 200W N-Type Solar Panel works with the BLUETTI AC180P: about 25.2 V on a 20°F morning against the station's 60 V limit, and about 192 W in full sun. Two panels: works (2 panels in series on Solar input), about 384 W.
Can I connect two 200W N-Type Solar Panel panels to the AC180P?
Yes, 2 panels in series on Solar input. That gives about 384 W.
What cable do I need to connect the 200W N-Type Solar Panel to the AC180P?
Use the solar charging cable that came with the station (MC4 on the panel side).
Is it safe on a cold morning?
Panel voltage rises in the cold. One 200W N-Type Solar Panel goes from 23 V on its label to about 25.2 V at 20°F and 26 V at 0°F. The AC180P accepts up to 60 V on the Solar input.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the AC180P
- BLUETTI AC180P: solar input 12 to 60 V on the Solar in (Solar input). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 23 V becomes 25.2 V.
- Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
- Max 500 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.