We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the EcoFlow NextGen 160W Portable Solar Panel work with the BLUETTI AC180?

Yes. One EcoFlow NextGen 160W Portable Solar Panel works with the BLUETTI AC180: about 23.3 V on a 20°F morning against the station's 60 V limit, and about 160 W in full sun. Two panels: works (2 panels in series on DC7909), about 320 W.

Verdict

Works

1 x NextGen 160W Portable Solar Panel into the AC180 (1 panel on DC7909) stays inside 12 to 60 V and under 10 A, even at 20F.

1 x NextGen 160W Portable Solar Panel1 panel on DC7909
AC180DC7909
Expected
160W
Voltage at 20F
23.3V
limit 60 V
Current
8.6A
cap 10 A
  • BLUETTI's manual: panels above 60V open-circuit voltage damage the station, and the warranty does not cover it.
  • Do not mix different types of panels, and use at least 100W of panels.
  • Ships with an XT60i charging cable, so it plugs straight into recent EcoFlow stations.
Cables to buy
  • Use an MC4 to DC7909 solar cable; check whether one came in the box.
EcoFlow NextGen 160W Portable Solar Panel

160 W, open-circuit 21.3 V, short-circuit 9.1 A, working 18.6 V / 8.6 A. Brand page Panel details

BLUETTI AC180

Solar input DC7909: 12 to 60 V, 500 W max. Manual Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in series on DC7909
Best option
DC790946.68.6320Works
2 panels in parallel on DC7909
The panels can push 17.2A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
DC790923.317.2186Works

Quick answers

Will the EcoFlow NextGen 160W Portable Solar Panel work with the BLUETTI AC180?

Yes. One EcoFlow NextGen 160W Portable Solar Panel works with the BLUETTI AC180: about 23.3 V on a 20°F morning against the station's 60 V limit, and about 160 W in full sun. Two panels: works (2 panels in series on DC7909), about 320 W.

Can I connect two NextGen 160W Portable Solar Panel panels to the AC180?

Yes, 2 panels in series on DC7909. That gives about 320 W.

What cable do I need to connect the NextGen 160W Portable Solar Panel to the AC180?

Use an MC4 to DC7909 solar cable; check whether one came in the box.

Is it safe on a cold morning?

Panel voltage rises in the cold. One NextGen 160W Portable Solar Panel goes from 21.3 V on its label to about 23.3 V at 20°F and 24 V at 0°F. The AC180 accepts up to 60 V on the DC7909.

Where to buy

$369 at the EcoFlow store, Oct 28, 2026
BuyAmazon
$499 at the BLUETTI store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC180

→EcoFlow 400W Portable Solar Panel, about 410 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→BLUETTI SP200L Solar Panel, about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two
→Renogy 200W Flexible Solar Panel, about 400 W with two

All 33 panels checked against the AC180

Rules we applied
  • BLUETTI AC180: solar input 12 to 60 V on the Solar in (DC7909). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 21.3 V becomes 23.3 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
Checked Oct 28, 2026