We may earn a commission if you buy through these links. It never changes a verdict. How this works
Find my setup

Will the BLUETTI PV120 Solar Panel work with the BLUETTI AC180?

Yes. One BLUETTI PV120 Solar Panel works with the BLUETTI AC180: about 26.7 V on a 20°F morning against the station's 60 V limit, and about 120 W in full sun. Two panels: works (2 panels in series on DC7909), about 239 W.

Verdict

Works

1 x PV120 Solar Panel into the AC180 (1 panel on DC7909) stays inside 12 to 60 V and under 10 A, even at 20F.

1 x PV120 Solar Panel1 panel on DC7909
AC180DC7909
Expected
120W
Voltage at 20F
26.7V
limit 60 V
Current
6.1A
cap 10 A
  • BLUETTI's manual: panels above 60V open-circuit voltage damage the station, and the warranty does not cover it.
  • Do not mix different types of panels, and use at least 100W of panels.
Cables to buy
  • Use an MC4 to DC7909 solar cable; check whether one came in the box.
BLUETTI PV120 Solar Panel

120 W, open-circuit 24.4 V, short-circuit 6.4 A, working 19.6 V / 6.1 A. Brand page Panel details

BLUETTI AC180

Solar input DC7909: 12 to 60 V, 500 W max. Manual Station details

Change the count or temperature

Two panels: every way to wire them

WiringInputVolts at 20FAmpsWattsVerdict
2 panels in series on DC7909
Best option
DC790953.46.1239Works
2 panels in parallel on DC7909
The panels can push 12.2A but this input takes 10A, so the station caps it. Safe, you just lose some watts.
DC790926.712.2196Works

Quick answers

Will the BLUETTI PV120 Solar Panel work with the BLUETTI AC180?

Yes. One BLUETTI PV120 Solar Panel works with the BLUETTI AC180: about 26.7 V on a 20°F morning against the station's 60 V limit, and about 120 W in full sun. Two panels: works (2 panels in series on DC7909), about 239 W.

Can I connect two PV120 Solar Panel panels to the AC180?

Yes, 2 panels in series on DC7909. That gives about 239 W.

What cable do I need to connect the PV120 Solar Panel to the AC180?

Use an MC4 to DC7909 solar cable; check whether one came in the box.

Is it safe on a cold morning?

Panel voltage rises in the cold. One PV120 Solar Panel goes from 24.4 V on its label to about 26.7 V at 20°F and 27.5 V at 0°F. The AC180 accepts up to 60 V on the DC7909.

Where to buy

Out of stock at the BLUETTI store
View at store
$499 at the BLUETTI store, Oct 28, 2026
BuyAmazon

We may earn a commission if you buy through these links. It never changes a verdict.

Other panels that work with the AC180

→EcoFlow 400W Portable Solar Panel, about 410 W with two
→Jackery SolarSaga 200 (JS-200D), about 400 W with two
→BLUETTI SP200L Solar Panel, about 400 W with two
→Renogy E.Flex 200W Portable Solar Panel, about 400 W with two
→Renogy 200W Flexible Solar Panel, about 400 W with two

All 33 panels checked against the AC180

Rules we applied
  • BLUETTI AC180: solar input 12 to 60 V on the Solar in (DC7909). BLUETTI sets this limit on open-circuit voltage (Voc), so we hold the panels' Voc on your coldest morning to it.
  • Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 24.4 V becomes 26.7 V.
  • Current over the 10 A cap is safe: the station takes 10 A and you get fewer watts. We count only the capped watts.
  • Max 500 W on this input.
Assumptions
  • Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
  • Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.
Sources
From the brand's pagePV120 Solar Panel label values
Checked Oct 28, 2026