Will the Jackery SolarSaga 100 Air work with the Anker SOLIX F1500?
Yes, with a catch. Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on XT60), about 200 W.
Works, with a catch
It charges, but read the note. Best option: 1 panel on XT60.
- Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage.
- The brand does not say whether its voltage limit is open-circuit or working voltage, so we check against the stricter open-circuit number.
- Anker does not say whether its voltage limit is open-circuit or working voltage, so the checker uses the stricter reading.
- Anker's own page gives two different solar limits for this model (up to 30V and up to 60V). Until that is settled, the checker uses 30V.
- Bifacial: Jackery also rates it at 110 W with light on the back (BNPI); the checker uses the front-only figures.
- Use an MC4 to XT60 solar cable.
100 W, open-circuit 29.7 V, short-circuit 4.1 A, working 25.4 V / 4 A. Brand page Panel details
Anker SOLIX F1500Solar input XT60: 11 to 30 V, 600 W max. Brand page Station details
Change the count or temperatureTwo panels: every way to wire them
| Wiring | Input | Volts at 20F | Amps | Watts | Verdict |
|---|---|---|---|---|---|
| 2 panels in parallel on XT60 Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage. | XT60 | 32.5 | 7.9 | 200 | Works, with a catch |
| 2 panels in series on XT60 Open-circuit voltage 59.4V is above the station's 30V limit. Going over a station's input voltage limit can damage it. | XT60 | 65 | 4 | 0 | Don't connect |
Quick answers
Will the Jackery SolarSaga 100 Air work with the Anker SOLIX F1500?
Yes, with a catch. Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage. Two panels: works, with a catch (2 panels in parallel on XT60), about 200 W.
Can I connect two SolarSaga 100 Air panels to the F1500?
Yes, 2 panels in parallel on XT60. That gives about 200 W, with one catch: Fine in mild weather (29.7V), but on a 20°F (-7°C) morning the open-circuit voltage rises to about 32.5V, above the 30V limit. Cold makes panels push more voltage..
What cable do I need to connect the SolarSaga 100 Air to the F1500?
Use an MC4 to XT60 solar cable.
Is it safe on a cold morning?
Panel voltage rises in the cold. One SolarSaga 100 Air goes from 29.7 V on its label to about 32.5 V at 20°F and 33.5 V at 0°F. The F1500 accepts up to 30 V on the XT60.
Where to buy
We may earn a commission if you buy through these links. It never changes a verdict.
Other panels that work with the F1500
- Anker SOLIX F1500: solar input 11 to 30 V on the Solar in (XT60). Anker SOLIX does not say whether this limit is open-circuit or working voltage, so we use the stricter reading: open-circuit voltage on your coldest morning.
- Cold raises panel voltage: we add 0.30% per °C below 77F (25°C), a typical figure, since this panel does not publish its own. At 20F one panel's 29.7 V becomes 32.5 V.
- Current over the 12.5 A cap is safe: the station takes 12.5 A and you get fewer watts. We count only the capped watts.
- Max 600 W on this input.
- Cold-morning voltage uses 0.30% per °C, typical for crystalline panels. This panel's own value is not published.
- Expected watts are the best case in full sun. Real-world midday output is usually 60 to 80% of that.